In Jan 2013, IHS, Haystack donated the use of their online cross reference and data list. Wherever you see NSN numbers below that is how we found them.
We are still looking for more 1940s BUORD standard reference data, and a good cross reference for material specifications.
stock-8-Z-800 |
Filling Cans |
stock-8-Z-801 |
For Turret and Broadside Mounts Filling Funnel |
stock-8-Z-802 |
Water Bucket |
stock-8-Z-804 |
Sponge Bucket |
stock-8-Z-805 |
3" Tompion General Arrangement and Details |
stock-8-Z-807 |
4" Tompion General Arrangement and Details |
stock-8-Z-808 |
5" Tompion General Arrangement and Details |
stock-8-Z-809 |
6" Tompion General Arrangement and Details |
stock-8-Z-810 |
7" Tompion General Arrangement and Details |
stock-8-Z-811 |
Buffer Mat |
stock-8-Z-812 |
7" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-813 |
6" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-814 |
5" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-815 |
4" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-816 |
3" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-817 |
14" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-818 |
13" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-819 |
12" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-820 |
10" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-821 |
8" Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-822 |
1, 3 and 6 PDR. Bristle Sponge Head (Bore) General Arrangement and Details |
stock-8-Z-823 |
6-14" Incl. Bristle Sponge Head for Chamber (small) General Arrangement and Details |
stock-8-Z-824 |
1, 3 and 6 PDR. Sectional Handle |
stock-8-Z-825 |
3-14" Incl. Sectional Handle |
stock-8-Z-826 |
1, 3 and 6 PDR. Tompions |
stock-8-Z-827 |
Firing Lanyard and Drill Hook |
stock-8-Z-828 |
Cap, Canvas, Bristle Sponges 1, 3 and 6 Pounder |
stock-8-Z-829 |
3" Bristle Sponge Canvas Cap |
stock-8-Z-830 |
4" Bristle Sponge Canvas Cap |
stock-8-Z-831 |
5" Bristle Sponge Canvas Cap |
stock-8-Z-832 |
12" Bristle Sponge Canvas Cap |
stock-8-Z-833 |
14" Bristle Sponge Canvas Cap |
stock-8-Z-834 |
5" Combination Sponge and Rammer Head |
stock-8-Z-835 |
Blue Print Folio Mk 1, and Mk 1 Mod 1 and 2 |
stock-8-Z-836 |
Landing and Field Guns, Drag and Check Ropes |
stock-8-Z-837 |
Magazine Key Rack |
stock-8-Z-838 |
6" Combination Sponge and Rammer Head |
stock-8-Z-839 |
Tool and Accessory Case (for 1 Pounder Boat Mount) |
stock-8-Z-840 |
7" Combination Sponge and Rammer Head |
stock-8-Z-841 |
6" Bristle Sponge Canvas Cap |
stock-8-Z-842 |
7" Bristle Sponge Canvas Cap |
stock-8-Z-843 |
8" Bristle Sponge Canvas Cap |
stock-8-Z-844 |
10" Bristle Sponge Canvas Cap |
stock-8-Z-845 |
12" Tompion |
stock-8-Z-846 |
10" Tompion |
stock-8-Z-847 |
8" Tompion |
stock-8-Z-848 |
Hand Rammer |
stock-8-Z-849 |
6" to 16" incl. Bristle Spong Canvas Cap (for chamber) |
stock-8-Z-850 |
Signal Staff (US Army Model) |
stock-8-Z-851 |
Transporting Tompions for 12" and 14" Guns |
stock-8-Z-852 |
Transporting Tompions for 5" Guns |
stock-8-Z-853-sh1 |
Transporting Tompions for 6" Guns |
stock-8-Z-853-sh2 |
Transporting Tompions for 6" Guns |
stock-8-Z-854 |
16" Bristle Sponge Head (Bore) |
stock-8-Z-855 |
16" Bristle Sponge Canvas Cap |
stock-8-Z-856 |
Transporting Tompions for 4" Guns |
stock-8-Z-857 |
Removable Primer Seats and Wrench Box |
stock-8-Z-859 |
6" Tompion |
stock-8-Z-860 |
Transporting Tompions for 16" Guns |
stock-8-Z-861 |
Optical Maintenance Kit Box |
stock-8-Z-862 |
8" Dummy Powder Charge Section (Metal) for 55 cal guns |
stock-8-Z-863 |
6" Dummy Powder Charge Section (Metal) for 53 cal guns |
stock-8-Z-864 |
8" Dummy Powder Charge Section (Metal) for 45 cal guns |
stock-8-Z-865 |
12" Dummy Powder Charge Section (Metal) for 45 and 50 cal guns |
stock-8-Z-866 |
14" Dummy Powder Charge Section (Metal) for 50 cal guns |
stock-8-Z-867 |
16" Dummy Powder Charge Section (Metal) for 45 and 50 cal guns |
stock-8-Z-868 |
5" Tompion (For anti-aircraft and broadside guns) |
stock-8-Z-869 |
5" " Dummy Powder Charge Section (Metal) for 51 cal guns Mk 1 |
stock-8-Z-870 |
6" Dummy Powder Charge Section (Wooden) for 53 cal guns Mk 2 |
stock-8-Z-871 |
5" Dummy Powder Charge Section (Wooden) for 53 cal guns Mk 2 |
stock-8-Z-872 |
14" Powder Charge Section (Metal, for 14"-45 cal gun enlarged chamber) Mk 1 |
stock-8-Z-873 |
5" Dummy Powder Charge Section (Wooden- for 50 cal guns) Mk 3 |
stock-8-Z-874 |
4" Dummy Powder Charge Section (Wooden- for 45 cal guns) Mk 1 Mod 1 |
stock-8-Z-875 |
Bore Searcher (for 12" guns) Head and Handle Support Details |
stock-8-Z-876 |
Bore Searcher (for 12" guns) General Arrangement |
stock-8-Z-877 |
Bore Searcher (3" to 16" guns) Miscellaneous Details |
stock-8-Z-878 |
Bore Searcher (14" guns) General Arrangement |
stock-8-Z-879 |
Bore Searcher for 14" guns, Head and Handle Support Details |
stock-8-Z-880 |
8" Bore Search, General Arrangement and Details |
stock-8-Z-881 |
5" Bore Search, General Arrangement and Details |
stock-8-Z-882 |
3" Bore Search, General Arrangement and Details |
stock-8-Z-883 |
Hand Rammers for 5.0" to 16.0" Guns |
stock-8-Z-884 |
4" Bore Search, General Arrangement and Details |
stock-8-Z-885 |
Impression Taker (for 14" guns), General Arrangement and Details |
stock-8-Z-886 |
Impression Taker (for 14" guns), Body and Details |
stock-8-Z-887 |
Impression Taker (for 16" guns), General Arrangement and Details |
stock-8-Z-888 |
Impression Taker (for 16" guns), Body and Details |
stock-8-Z-889 |
Impression Takers (12" to 16" guns), Operating Details |
stock-8-Z-890 |
Impression Taker (for 12" guns), General Arrangement and Details |
stock-8-Z-891 |
Impression Taker (for 12" guns), Body and Details |
stock-8-Z-892 |
Transporting Tompion for 8" guns |
stock-8-Z-893 |
Impression Taker (for 8" guns), Body and Details |
stock-8-Z-894 |
Impression Taker (for 8" guns), General Arrangement and Details |
stock-8-Z-895 |
Impression Taker (for 4.0" and 5.0" guns), Elevating Wedge and Details |
stock-8-Z-896 |
Impression Taker (for 4.0"" guns), General Arrangement and Details |
stock-8-Z-897 |
Impression Taker (for 5.0" guns), General Arrangement and Details |
stock-8-Z-898 |
Impression Taker (for 6.0" guns), Body Details |
stock-8-Z-899 |
Impression Taker (for 6.0" guns), General Arrangement and Details |
stock-8-Z-901 |
Gun Priming Tools for Mushroom, Primer Seat and Vent |
stock-8-Z-902 |
Hand Screw Driver (with detachable blades) |
stock-8-Z-903 |
Brass Punches |
stock-8-Z-904 |
Combination Wrench, 3 Pdr Mount Mk II and III, 6 Pdr Mount Mk III and Mk III Mod 1 |
stock-8-Z-905 |
Special Tools (sheet no 1) |
stock-8-Z-907 |
Spring Compressor Ratchet Wrench General Arrangement |
stock-8-Z-908 |
Spring Compressor Ratchet Wrench Details |
stock-8-Z-909 |
Screwdriver Stock and Blades (Hexagonal Stock) |
stock-8-Z-910 |
Special Tools |
stock-8-Z-911 |
Special Tools (sheet no. 3) |
stock-8-Z-912 |
Electrical Attachments Terminal Crimping Die |
stock-8-Z-913 |
Special Tools (sheet no. 4) |
stock-8-Z-914 |
Special Tools (sheet no. 5) |
stock-8-Z-915 |
Special Tools (sheet no. 6) |
stock-8-Z-916 |
Special Tools (sheet no. 7) |
stock-8-Z-917 |
Special Tools (sheet no. 8) |
stock-8-Z-918 |
Special Tools (sheet no. 9) |
stock-8-Z-919 |
Special Tools (sheet no. 10) |
stock-8-Z-920 |
Special Tools (sheet no. 11) |
stock-8-Z-921 |
Special Tools (sheet no. 12) |
stock-8-Z-922 |
Removable Primer Seat Wrench |
stock-8-Z-924 |
Removable Primer Seat Wrench |
stock-8-Z-925 |
Special Tools (sheet no. 13) |
stock-8-Z-926 |
Special Tools (sheet no. 14) |
stock-8-Z-927 |
Special Tools (sheet no. 15) |
stock-8-Z-928 |
Windshield Wrenches for 14" and 16" Projectiles |
stock-8-Z-929 |
Special Tools (sheet no. 16) |
stock-8-Z-930 |
Special Tools (sheet no. 17) |
stock-8-Z-931 |
Priming Tool |
stock-8-Z-932 |
Piston-Ring Clamp and Buffer Cylinder Ring Wrench (for catapult guns mk V and VI) |
stock-8-Z-933 |
Special Tools |
stock-8-Z-934 |
Tram (for checking gun elevating and train), General Arrangement and Details |
stock-8-Z-935 |
Tram Test Gauge, General Arrangement and Details |
stock-8-Z-936 |
Special Tools (For gun director Mk XXXIII) |
stock-8-Z-937 |
Tools for assembling breech block in 5" 38 cal gun |
stock-8-Z-938 |
Special Tools (For 5" slide Mk XXI, XXII and mods., and 5" housing Mk 1) |
stock-8-Z-939-sh1 |
Tools for assembling breech block in 5" 25 cal gun |
stock-8-Z-939-sh2 |
Tools for assembling breech block in 5" 25 cal gun |
stock-8-Z-940 |
Special Tools (sheet no. 19) |
stock-8-Z-941 |
Special Tools (For 5" carriage mark XIX, Train and Elevation Indicator Regulator Drive) |
stock-8-Z-942 |
Counter recoil system packing withdrawing tools (for 5"/25 and 38 and 54 cal anti-aircraft guns) |
stock-8-Z-943-sh1 |
Socket wrenches for ball bearing lock nuts |
stock-8-Z-943-sh2 |
Socket wrenches for ball bearing lock nuts |
stock-8-Z-944 |
Special Tools (sheet no. 20) |
stock-8-Z-945 |
Breech Block Releasing Tools (for 5"/38 and 5"/25 cal mounts) |
stock-8-Z-946 |
Special Tools (sheet no. 21) |
stock-8-Z-948 |
Special Tools |
stock-8-Z-949 |
Special Tools |
stock-8-Z-950 |
Special Socket Wrench, Universal and Extensions |
stock-8-Z-951 |
Special Tools |
stock-8-Z-952 |
Special Tools |
stock-8-Z-953 |
Special Tools |
stock-8-Z-954 |
Tools and equipment for sealing air duct in screw box liner on 8, 14 and 16 inch guns |
stock-8-Z-955 |
Special Tools |
stock-8-Z-956 |
Special Tools, Details |
stock-8-Z-957 |
Special Tools, Details |
stock-8-Z-958 |
Special Tools |
stock-8-Z-959 |
Special Tools, for Synchro Motor Type 1F |
stock-8-Z-960 |
Special Tools |
stock-8-Z-961 |
Electrical Attachments Terminal Crimping Tool |
stock-8-Z-962 |
Special Tools |
stock-8-Z-963 |
Tool for Crimping Ferrules to Rope Ends (1/4" Rope) |
stock-8-Z-964 |
Special Tools |
stock-8-Z-966 |
Packing Gun (for sealing screw box liners), Details |
stock-8-Z-967 |
Wrenches Special (for hydraulic fittings on rocket launcher assembly Mk 102, Mod 0) |
stock-8-Z-968 |
Mushroom lifting tool (for 14" breech mechanism) |
stock-8-Z-969 |
Mushroom lifting tool (for 16" breech mechanism) |
stock-8-Z-970 |
Special Wrenches (for hydraulic fittings on rocket launcher assembly Mk 102) |
stock-8-Z-971 |
Special Tools (for 8"/55 Cal. 3 gun turret) |
stock-8-Z-972 |
Special Tools (for 8"/55 Cal. 3 gun turret) |
stock-8-Z-973 |
Special Tools (for 8"/55 Cal. 3 gun turret) |
stock-8-Z-974 |
Special Tools (for 6"/47 Cal. D.P. type gun) |
stock-8-Z-1000-sh1 |
Countersunk Screw Bolts 1/4" to 1" Diameter |
stock-8-Z-1000-sh2 |
Countersunk Screw Bolts 1/4" to 1" Diameter |
stock-8-Z-1005 |
Cap and Adjusting Screws (Steel) |
stock-8-Z-1006 |
Round Head Machine Screws 1/4" to 1/2' Diameters |
stock-8-Z-1008 |
Machine Screws No 0 and 1, (Special Screws For Optical Equipment), Brass and Nickel Silver (German Silver) |
stock-8-Z-1009 |
Machine Screws No 2, (Special Screws For Optical Equipment), Brass and Nickel Silver (German Silver) |
stock-8-Z-1010 |
Machine Screws No 4, (Special Screws For Optical Equipment), Brass and Nickel Silver (German Silver) |
stock-8-Z-1011 |
Machine Screws No 6, (Special Screws For Optical Equipment), Brass and Nickel Silver (German Silver) |
stock-8-Z-1023 |
Special Studs |
stock-8-Z-1104 |
Drain hole Plugs and Washers |
stock-8-Z-1117 |
Frictionless Washers |
stock-8-Z-1118 |
Handwheels, Sheet No. 3 |
stock-8-Z-1020 |
Machine Screws No. 10 (special screws for optical equipment) brass and german silver |
stock-8-Z-1021 |
Machine Screws 1/4" dia. (special screws for optical equipment) brass and german silver |
stock-8-Z-1022 |
Miscellaneous Screws |
stock-8-Z-1024 |
Ordnance Fastenings, Spacers |
stock-8-Z-1025 |
Special Dowels, Details |
stock-8-Z-1026 |
1-1/4 Body Bound Bolts |
stock-8-Z-1100 |
Gas Ejector Fittings, 1".0 3 Way Valve |
stock-8-Z-1101 |
Eye Shields and Clamp |
stock-8-Z-1102 |
1-5/8" and 2-1/8" Universal Joint (Turpin and Holden Patent) |
stock-8-Z-1103 |
Electrical Attachment Firing Circuit Contacts |
stock-8-Z-1105 |
Electrical Attachments Cable Terminals and Plugs |
stock-8-Z-1106 |
Electrical Attachment Firing Circuit Contacts |
stock-8-Z-1107 |
Electrical Attachment Terminal and Clamps |
stock-8-Z-1109 |
Standard Rapping and Lifting Plates, For Patterns, Details |
stock-8-Z-1110 |
Face Guards and Eye Shields, Sheet 1 |
stock-8-Z-1111 |
Flexible Metal Hose Coupling, For Working Pressure Up to 250 lbs. |
stock-8-Z-1112 |
Face Guard and Eye Shields, Sheet 2 |
stock-8-Z-1113 |
Handwheel and Folding Handle, Sheet 1 |
stock-8-Z-1114 |
Handwheel and Folding Handle, Sheet 2 |
stock-8-Z-1115 |
Bronze Bushings (Cast Finish) |
stock-8-Z-1119 |
Frictionless Washers (Sheet 2) |
stock-8-Z-1120 |
Flexible Metallic Hose with Couplings |
stock-8-Z-1121 |
Universal Joint for 1-1/8" and 1-1/4" Dia. Shaft |
stock-8-Z-1122 |
Standard Dowel Pins for Patterns |
stock-8-Z-1124 |
Electrical Attachments Switch Details |
stock-8-Z-1125 |
Terminal Nut for Firing Locks Mk X Mod 2, and Mk XIV and Mods |
stock-8-Z-1126 |
Match Plate Fittings, Battens, Sheet 1 |
stock-8-Z-1127 |
Match Plate Fittings, Battens, Sheet 2 |
stock-8-Z-1128 |
Electrical Attachments, Coupling Mk III |
stock-8-Z-1129 |
Filling and Drain Plug |
stock-8-Z-1130 |
Automatic Drain Valves |
stock-8-Z-1131 |
Name and Instruction Plates |
stock-8-Z-1132 |
Name and Instruction Plates |
stock-8-Z-1133 |
Gas Ejector Valve Mk VII |
stock-8-Z-1134 |
Handwheel and Handles (sheet 4) |
stock-8-Z-1135 |
Stock Material, Ordnance Fittings, Eye Guards |
stock-8-Z-1136 |
Stock Material, Ordnance Fittings, Cable Clamps |
stock-8-Z-1137 |
2-1/4" Fire Hose Connector (Double Ferrule) |
stock-8-Z-1138 |
Handwheels (Sheet No. 5) |
stock-8-Z-1139 |
Hose Connections |
stock-8-Z-1140-sh1 |
Light Well Mk 7, and Mk 7 Mo 1, 2, 3, Assembly and Details (Double Lamp) |
stock-8-Z-1140-sh2 |
Light Well Mk 7, and Mk 7 Mo 1, 2, 3, Assembly and Details (Double Lamp) |
stock-8-Z-1141-sh1 |
Terminal Boards, Assembly and Details, Sheet 1 |
stock-8-Z-1141-sh2 |
Terminal Boards, Assembly and Details, Sheet 2 |
stock-8-Z-1145 |
Universal Joint 1-5/8" X 4-1/4" Long |
stock-8-Z-1146 |
Joints, Universal Precision, ".65 Dia. X 2-1/4" Long, Assembly and Detail |
stock-8-Z-1147 |
Joints, Universal Precision, 1-1/6" Dia. x 3".0 long, Assemblies and Details |
stock-8-Z-1148 |
Joints, Universal Precision, 1-1/4" Dia. x 4".0 long |
stock-8-Z-1149 |
Joints, Universal Precision, 1-3/4" Dia. x 5".0 long |
stock-8-Z-1150 |
Synthetic Rubber Hose and Fittings |
stock-8-Z-1151 |
Couplings Disc. 3".0 Dia. Shaft Sizes 5/8" to 1".0 Dia. |
stock-8-Z-1152 |
3" Dia.Adjustable Disc. Coupling, Shaft Size 5/8" or 3/4" |
stock-8-Z-1154 |
Flexible Coupling, Assembly |
stock-8-Z-1155-sh1 |
Fittings Hydraulic Pipe or I.P.S. Tubing, Flanges, Elbows and Tees, Square (Solid Short Pilot Type) Sheet 1 |
stock-8-Z-1155-sh2 |
Fittings Hydraulic Pipe or I.P.S. Tubing, Flanges, Elbows and Tees, Square (Solid Short Pilot Type) Sheet 2 |
stock-8-Z-1157 |
Air Valve |
stock-8-Z-1158 |
3" Dia. Adjustable Disc Coupling, 3".0 Dia. Disc Coupling, Double Disc Type |
stock-8-Z-1159 |
Adjustable Couple (Oldham Type) Shaft Diameter 7/8" |
stock-8-Z-1160 |
Fittings, Hydraulic Pipe or IPS Tubing, Flanges Round (Solid, Short Pilot Type) |
stock-8-Z-1161 |
Flexible Disc Coupling (For 7/8 to 1-1/8 Shaft Splines) |
stock-8-Z-1162 |
Flexible Disc Adjustable Coupling (For 7/8 to 1-1/8 Shaft Splines) |
stock-8-Z-1163 |
Flexible Disc Coupling (For 1/2 and 5/8 Shaft Splines) |
stock-8-Z-1164 |
Flexible Disc Adjustable Coupling (For 1/2 and 5/8 Shaft) |
stock-8-Z-1200 |
3"0 Bristle Sponges (For Field, Land and Mountain Guns) |
stock-8-Z-1201 |
3"0 Bristle Sponge Handles (For Field, Land and Mountain Guns) Handles, Couplings and Rammer |
stock-8-Z-1202 |
Impression Taker (For 3".0 Guns) |
stock-8-Z-1204 |
6" Dummy Powder Charge Mk 4, Wooden, (For 50 Calg Guns) |
stock-8-Z-1205 |
Transporting Tampions for 3" Guns |
stock-8-Z-1206 |
Dummy Powder Charge Section Mk 5 (8"/55 Cal. Metal Case, Rubber Covered) |
stock-8-Z-1207 |
Bore Searchers 5" to 16", Sectional Handle |
stock-8-Z-1208 |
Bore Searchers 5" to 16", Connector and Shank |
stock-8-Z-1209 |
6" Bore Searcher |
stock-8-Z-1210 |
Bore Searcher (for 16" Guns), Head and Handle Support Details |
stock-8-Z-1211 |
Bore Searcher (for 16" Guns) |
stock-8-Z-1212 |
Bore Searchers (3" and 4" Guns), Sectional Handle Details |
stock-8-Z-1213 |
Bore Searchers (3" and 4" Guns), Connector and Shank Details |
stock-8-Z-1214 |
Filling Funnels, Miscellaneous |
stock-8-Z-1215 |
Tram and Test Gauge Box |
stock-8-Z-1216 |
Master Gauge Bracket and Adapters (For Checking Pressure Gauges on Counter Recoil Systems) |
stock-8-Z-1217 |
6" Dummy Powder Charge Mk 5 (wooden) (for 6" .47 cal. Bag Guns) |
stock-8-Z-1218 |
6" Tompion |
stock-8-Z-1219 |
1".10 Bristle Sponge Head and Sectional Handle |
stock-8-Z-1221 |
5" Bristle Sponge Head |
stock-8-Z-1222 |
4" Topion |
stock-8-Z-1223 |
Thread Protecting Ring, 5"-38 Cal. Gun Barrel (5"-38 Cal. Guns Mk XII and Mk XII, Mod. 1) |
stock-8-Z-1224 |
Thread Protecting Ring, 5"-25 Cal. Gun Barrel (5"-25 Cal. Anti-Aircraft gun Mk. XIII) |
stock-8-Z-1225 |
Thread Protecting Ring, , 6" 47 Cal. Gun Barrel (6"/47 Cal. Guns Mk XVI) |
stock-8-Z-1226 |
3" Tompion |
stock-8-Z-1227 |
3" Bristle Sponge Head |
stock-8-Z-1228 |
4" Bristle Sponge Head |
stock-8-Z-1229 |
6" Bristle Sponge Head |
stock-8-Z-1233 |
3 and 6 Pdr. Bristle Sponge Heads |
stock-8-Z-1234 |
1 Pdr. Bristle Sponge Head |
stock-8-Z-1235 |
Tompion For Blast Reducer, 3" Boat Gun, Mk. XIV |
stock-8-Z-1236 |
Bore Searcher (For 1 Pdr. Guns) |
stock-8-Z-1237 |
7" Bore Searcher |
stock-8-Z-1238 |
Transporting Tompions for 7"-45 Cal. Guns, Mark II Mods. |
stock-8-Z-1239 |
7" Tompion |
stock-8-Z-1240 |
Transporting Tompion (Breech) for 12" 50 cal Guns Mk 8, B.M., Mk II |
stock-8-Z-1241 |
Bristle Sponge (For Depth Charge Projector Mk. 6) |
stock-8-Z-1242 |
Bristle Sponge For Catapult Gun Mk. 6 Mod. 1) |
stock-8-Z-1243 |
16" Bristle Sponge Head (Bore) |
stock-8-Z-1244 |
4" Bristle Sponge Head |
stock-8-Z-1245 |
5" Bristle Sponge Head |
stock-8-Z-1246 |
6" Bristle Sponge Head Type "B" |
stock-8-Z-1247 |
Swivel Head, Bristle Sponge (For Depth Charge Projector Head) |
stock-8-Z-1248 |
3" Tompion, Plastic Design |
stock-8-Z-1249 |
4" Tompion, Plastic Design |
stock-8-Z-1250 |
5" Tompion, Plastic Design |
stock-8-Z-1251 |
6" Tompion, Plastic Design |
stock-8-Z-1252 |
6".50 Bristle Sponge Head |
stock-8-Z-1253 |
Transporting Tompion, For 8" Guns |
stock-8-Z-1254 |
Empty Case Ram and Funnel Adapter, (For 8"55 Cal Three Gun Turret, For 5"/54 D.P. Twin Mount) |
stock-8-Z-1255 |
Spring Compressor (For 6"/47 Powder Hoist) |
stock-8-Z-1256 |
Electrical Test Prod |
stock-8-Z-1257 |
Hot Case Removal Tool (For 5"/54 Cal Mount Mk 39 Mod 0) |
stock-8-Z-1260 |
Lamp Housing |
stock-8-Z-1261 |
Cycle and Recoil Counter Housing |
stock-8-Z-1262 |
Cycle and Recoil Counter Housing, Details |
stock-8-Z-2500 |
Cable Jack Assembly |
stock-8-Z-2501 |
Chevron Packing Assembly Tool |
stock-8-Z-2502 |
Packing Guide |
stock-8-Z-2503 |
Packing Rammer |
stock-8-Z-2510 |
Gear Puller Assembly |
stock-8-Z-2511 |
Spanner Wrench |
stock-8-Z-2512 |
Open End Wrench Weldment |
stock-8-Z-2514 |
Switch Actuator Wrench |
stock-8-Z-2515 |
Special Pliers Assembly |
stock-8-Z-2516 |
Firing Pin Wrench |
stock-8-Z-2517 |
Square Key Wrench |
stock-8-Z-3500 |
Barrel Wrench |
stock-8-Z-3501 |
Spanner Wrench |
stock-8-Z-4000 |
Stud |
stock-8-Z-4001 |
Bolt |
stock-8-Z-4002 |
1/4" Flat Head Machine Screw |
stock-8-Z-4003 |
1/4" Pan Head Screw |
stock-8-Z-4004 |
No. 10 Filister Head Screw |
stock-8-Z-4005 |
Machine Screw |
stock-8-Z-4500 |
Housing Clamp Base Screw |
stock-8-Z-4501 |
3/8" Wing Screws |
stock-8-Z-4502 |
Body Bound Bolts |
stock-8-Z-4503 |
Spacers |
stock-8-Z-5500 |
No. 7/0 Split Taper Pins |
stock-8-Z-5501 |
No. 6/0 Split Taper Pins |
stock-8-Z-5507 |
5/16 Hexagon Semi-Finished Bolts |
stock-8-Z-5510 |
1/2 Hexagon Semi-Finished Bolts |
stock-8-Z-5512 |
5/8 Hexagon Semi-Finished Bolts |
stock-8-Z-5513 |
3/4 Hexagon Semi-Finished Bolts |
stock-8-Z-5514 |
7/8 Hexagon Semi-Finished Bolts |
stock-8-Z-5515 |
1.0 Hexagon Semi-Finished Bolts |
stock-8-Z-5527 |
No. 2 (.086) Headless Slotted Set Screws |
stock-8-Z-5532 |
No. 8 (.164) Headless Slotted Set Screws |
stock-8-Z-5535 |
1/4 Headless Slotted Set Screw |
stock-8-Z-5542 |
No. 6 (.138) Headless Slotted Set Screw |
stock-8-Z-5544 |
No. 10 Socket Head Cap Screw |
stock-8-Z-5560 |
No. 12 Hexagonal Socket Head Cap Screws |
stock-8-Z-5561 |
1/4" Socket Head Cap Screws |
stock-8-Z-5563 |
3/8" Socket Head Cap Screw |
stock-8-Z-5575 |
Body Bound Socket Head Bolts |
stock-8-Z-5578 |
"U" Bolt |
stock-8-Z-5579 |
Jam Nuts |
stock-8-Z-5580 |
Clevis Pins |
stock-8-Z-6000 |
Slotted-End Rod |
stock-8-Z-6001 |
Key |
stock-8-Z-6002 |
Pipe |
stock-8-Z-6003 |
Base Plate |
stock-8-Z-6004 |
Bracket |
stock-8-Z-6005 |
Base Plate and Pipe Weldment |
stock-8-Z-6006 |
Stud and Bracket Weldment |
stock-8-Z-6007 |
Pin |
stock-8-Z-6008 |
Plier Tip Plate |
stock-8-Z-6009 |
Pin |
stock-8-Z-6010 |
Plier Tip Plate and Pin Weldment Assembly Right Hand |
stock-8-Z-6011 |
Plier Tip Plate and Pin Weldment Assembly Left Hand |
stock-8-Z-6012 |
Lug |
stock-8-Z-6013 |
Spacer |
stock-8-Z-6014 |
Body Strips |
stock-8-Z-6015 |
Supporting Ring |
stock-8-Z-6016 |
Base |
stock-8-Z-6017 |
Base Plate |
stock-8-Z-6018 |
Separating Disc |
stock-8-Z-6500 |
1-1/8 Oldham Coupling Assembly |
stock-8-Z-6501 |
Coupling Body Detail |
stock-8-Z-6502 |
Coupling Body Detail - Involute Spline |
stock-8-Z-6503 |
1-1/4 Oldham Coupling Assembly |
stock-8-Z-6504 |
Coupling Body Detail |
stock-8-Z-6505 |
Coupling Disc Detail |
stock-8-Z-6506 |
1-3/4 Oldham Coupling Assembly |
stock-8-Z-6507 |
Coupling Body Detail |
stock-8-Z-6508 |
Coupling Disc Detail |
stock-8-Z-6509 |
7/8 Oldham Coupling Assembly |
stock-8-Z-6510 |
Coupling Body Detail |
stock-8-Z-6511 |
Coupling Disc Detail |
stock-8-Z-6513 |
Splined Head Jack Screw |
stock-8-Z-6514 |
Socket and Cable Assembly |
stock-8-Z-6515 |
Housing Clamp Base |
stock-8-Z-6516 |
Socket Pin |
stock-8-Z-6517 |
Jack Screw |
stock-8-Z-6518 |
Cable Socket |
stock-8-Z-6519 |
Cable |
stock-8-Z-6520 |
Thrust Collar |
stock-8-Z-6521 |
Screw Jack Bar |
stock-8-Z-6522 |
Flexible Disc. Adjustable Coupling Assembly |
stock-8-Z-6523 |
Coupling Hub Details |
stock-8-Z-6524 |
Flexible Disc. Coupling, 7/8 Involute to 1.0 Straight Spline Assembly |
stock-8-Z-6525 |
Coupling Hub 7/8 Involute Spline |
stock-8-Z-6526 |
Body |
stock-8-Z-6527 |
Handle |
stock-8-Z-6528 |
Rammer Head |
stock-8-Z-6529 |
Rammer Head Insert |
stock-8-Z-6530 |
Rammer Handle |
stock-8-Z-6531 |
Rammer Handle Collar |
stock-8-Z-6532 |
Wrench Head |
stock-8-Z-6533 |
Wrench Handle |
stock-8-Z-6534 |
Cleat |
stock-8-Z-6535 |
Half Hinge |
stock-8-Z-6536 |
Half Hinge |
stock-8-Z-6537 |
Brake Lining |
stock-8-Z-6538 |
Roller Chain Sprocket |
stock-8-Z-6539 |
Roller Chain Sprocket |
stock-8-Z-6540 |
Wire Rope |
stock-8-Z-6541 |
Wire |
stock-8-Z-7500 |
Band |
stock-8-Z-7501 |
Band Assembly |
stock-8-Z-7502 |
Band Assembly |
stock-8-Z-8000 |
Micro-Switch No. 1 |
stock-8-Z-8001 |
Selenium Rectifier |
stock-8-Z-8500 |
Hand Rammer Assembly |
stock-8-Z-9500 |
Dispensing Reel |
stock-12-Z-3 |
Taper Cotter Pins Nos 2, 4,6, and 8, Spring Cotter Pins Nos 1,3,5,7,10 and 12 |
stock-12-Z-4 |
Set Screws, 1/4" to 3/4" Diameters, American National St'd Course Thread Series |
stock-12-Z-5 |
Cap and Lock Screws, 1/4" to 1/2" Diameters (Steel) |
stock-12-Z-7-sh1 |
Machine Screws (Steel) Nos 2, 3, and 5 also No. 7 (obsolete) N.F. |
stock-12-Z-7-sh2 |
Machine Screws (Steel) Nos 2, 3, and 5 also No. 7 (obsolete) N.F. |
stock-12-Z-8-sh1 |
Machine Screws (Steel) No 10 (Fine and Course Threads) |
stock-12-Z-8-sh2 |
Machine Screws (Steel) No 10 (Fine and Course Threads) |
stock-12-Z-9 |
American National Standard Regular and Castellated Nuts (Fine and Course Threads)(Steel) 1/4" to 3".0 Diameters |
stock-12-Z-11 |
U.S. Standard Nuts (Finished and Crown Nutes) for 1-1/2" Diameter Bolts |
stock-12-Z-12 |
Machine Screws, Brass, Nos. 3 and 5 (National Fine and Thread Series) |
stock-12-Z-13 |
Machine Screws (Brass), No. 10 (".190 Diam), National Course Series |
12-Z-15-3 |
1/4"-20 thumb nut |
12-Z-15-22 |
1/4"-20 3/8" long thumb screw, NSN: 5305-00-275-5400 |
12-Z-15-28 |
5/16"-18 thumb screw |
12-Z-15-34 |
3/8"-16, 1/2" thumb screw |
stock-12-Z-16 |
Cap Nuts, Sizes No 6 to 1-1/4", Steel, National Course and Fine Thread Series |
stock-12-Z-19-sh1 |
Machine Screws (Brass), Nos. 2, 4, 6 and 8 (National Course and Fine) |
stock-12-Z-19-sh2 |
Machine Screws (Brass), Nos. 2, 4, 6 and 8 (National Course and Fine) |
stock-12-Z-20 |
Machine Screws (Brass), Nos. 8, 10 and 12 (National Course and Fine) |
12-Z-21-63 |
#12 machine screw |
stock-12-Z-22-sh1 |
Washers, (Brass and Steel) |
stock-12-Z-22-sh2 |
Washers, (Brass and Steel) |
stock-12-Z-23 |
American National Standard Nuts for Machine Screws and Bolts (Brass Finished), ".060 to 2".0 Diameters |
stock-12-Z-24-sh1 |
American National Standard Finished Machine Bolts (Course Thread Series) (Steel), 1/4" to 3/4" Diameters |
stock-12-Z-24-sh2 |
American National Standard Finished Machine Bolts (Course Thread Series) (Steel), 1/4" to 3/4" Diameters |
stock-12-Z-25-sh1 |
American National Standard Finished Machine Bolts (Course Thread Series) (Steel), 7/8" to 2-1/4" Diameters |
stock-12-Z-25-sh2 |
American National Standard Finished Machine Bolts (Course Thread Series) (Steel), 7/8" to 2-1/4" Diameters |
stock-12-Z-26 |
Clips, Wire Rope (for 1/4" to 1/2" diameter rope) Assemblies and Details |
stock-12-Z-27 |
Wire Rope Clips for 5/8" to 7/8" diameter rope |
stock-12-Z-28 |
Wire Rope Clip (for 1" diameter rope) Details |
stock-12-Z-29 |
Chains Miscellaneous (commercial fastenings) Details |
stock-12-Z-34 |
Chains (Cable and Power) |
stock-12-Z-35 |
Drive Screws No. 0 to No. 14 |
stock-12-Z-36-sh1 |
Machine Screws (Steel) Nos. 2,4,5,6,8 and 12 (National Course Thread Series) |
stock-12-Z-36-sh2 |
Machine Screws (Steel) Nos. 2,4,5,6,8 and 12 (National Course Thread Series) |
stock-12-Z-36-sh3 |
Machine Screws (Steel) Nos. 2,4,5,6,8 and 12 (National Course Thread Series) |
stock-12-Z-37-sh1 |
Machine Screws (Steel) Nos. 4,6,8 and 12 (National Fine Thread Series) |
stock-12-Z-37-sh2 |
Machine Screws (Steel) Nos. 4,6,8 and 12 (National Fine Thread Series) |
stock-12-Z-38 |
Button Head Rivets (steel) 1/8" diameter to 1-1/8" diameter |
stock-12-Z-41-sh1 |
Machine Screws (Steel and Corrosion Resistant Steel) 1/4" to 7/16" Diameters (National Course Thread Series) |
stock-12-Z-41-sh2 |
Machine Screws (Steel and Corrosion Resistant Steel) 1/4" to 7/16" Diameters (National Course Thread Series) |
stock-12-Z-42-sh1 |
Machine Screws (Steel) 1/4" to 7/16" Diameters (National Fine Thread Series) |
stock-12-Z-42-sh2 |
Machine Screws (Steel) 1/4" to 7/16" Diameters (National Fine Thread Series) |
stock-12-Z-43 |
Machine Screws (Brass) 1/4" to 7/16" Diameters (American National Course Thread Series) |
12-Z-44-5 |
1/4" machine screw |
12-Z-45-269 |
5/8" machine screw |
stock-12-Z-46-sh1 |
American National Standards Finished Machine Bolts (Fine Thread Series) (Steel) 1/4" to 3/4" Diameters |
stock-12-Z-46-sh2 |
American National Standards Finished Machine Bolts (Fine Thread Series) (Steel) 1/4" to 3/4" Diameters |
12-Z-47-281 |
1/2"-20 x 1-1/4" machine bolt |
12-Z-47-283 |
1/2"-20 x 1" hex machine bolt |
12-Z-47-285 |
1-1/4" machine bolt |
stock-12-Z-48-sh1 |
Split Cotter Pins |
stock-12-Z-48-sh2 |
Split Cotter Pins |
stock-12-Z-49-sh1 |
Taper Pins |
stock-12-Z-49-sh2 |
Taper Pins |
stock-12-Z-50-sh1 |
Socket Set Screws (National Course Thread Series) |
stock-12-Z-50-sh2 |
Socket Set Screws (National Course Thread Series) |
stock-12-Z-50-sh3 |
Socket Set Screws (National Course Thread Series) |
stock-12-Z-50-sh4 |
Socket Set Screws (National Course Thread Series) |
stock-12-Z-51-sh1 |
Socket Head Cap Screws (National Course Thread Series) |
stock-12-Z-51-sh2 |
Socket Head Cap Screws (National Course Thread Series) |
stock-12-Z-54-sh1 |
Socket Set Screws (national fine thread) |
stock-12-Z-54-sh2 |
Socket Set Screws (national fine thread) |
stock-12-Z-54-sh3 |
Socket Set Screws (national fine thread) |
stock-12-Z-54-sh4 |
Socket Set Screws (national fine thread) |
12-Z-57-626 |
1-1/4" cap screw |
stock-12-Z-59 |
Grommets, Ferrels and Dee Rings, Details |
stock-12-Z-62 |
Synthetic Rubber Seals (flange seal) Details |
stock-12-Z-63 |
Retaining Rings (inside) |
stock-12-Z-64 |
Retaining Rings (outside) |
stock-12-Z-300 |
Grease and Oil Cups and Oil Hole Covers |
stock-12-Z-301 |
3/8" Pipe and Metallic Hose Unions (for working pressures up to 250 lbs) Composition |
stock-12-Z-302 |
1/2" Pipe Unions (for working pressures up to 250 lbs) Composition |
stock-12-Z-303 |
1/2" Pipe Unions (for working pressures up to 250 lbs) Composition |
stock-12-Z-304 |
3/4" Pipe and Metallic Hose Unions, (for working pressures up to 250 lbs) Composition |
stock-12-Z-305 |
3/4" Pipe Fittings (for working pressures up to 250 lbs) Composition |
stock-12-Z-306 |
1.0" Pipe and Metallic Hose Unions (for working pressures up to 250 lbs) Composition |
stock-12-Z-307 |
1" Pipe Fittings (for working pressures up to 250 lbs) Composition |
stock-12-Z-308 |
1-1/4" Pipe and Metallic Hose Unions (for working pressures up to 250 lbs) Composition |
stock-12-Z-309 |
1-1/4" Pipe Fittings (for working pressures up to 250 lbs) Composition |
stock-12-Z-310 |
1-1/2" Pipe Fittings (for working pressures up to 250 lbs) Details |
stock-12-Z-311 |
1-1/2" Pipe and Metallic Hose Unions (for working pressures up to 250 lbs) Details |
stock-12-Z-312 |
Keepers, Hasps, Hooks, Handles, Hinges and Becket Plate |
stock-12-Z-313 |
3/8" Pipe Fittings (composition), Details |
stock-12-Z-314 |
Electrical Attachments Switch Assemblies and Details |
stock-12-Z-315 |
Ball Bearings and Radial Thrust |
stock-12-Z-316 |
Grease and Oil Cups |
stock-12-Z-317 |
Ball Bearings Thrust |
stock-12-Z-318 |
Grease Gun and Nipples (Alemite System) |
stock-12-Z-319 |
Steel Balls 1/16" Diameters |
stock-12-Z-320 |
Joint Universal, Non-Precision, Hub Sizes 5/8" to 1-1/4" diameter, Requisition Drawing (Joint Yokes Blank) |
stock-12-Z-321-sh1 |
Pet and Steam Gauge Cocks, Details |
stock-12-Z-321-sh2 |
Pet and Steam Gauge Cocks, Details |
stock-12-Z-322 |
Grease Gun and Fittings |
stock-12-Z-323 |
Pressure Gauges (air, hydraulic or steam) Details |
stock-12-Z-324 |
Roller Bearings |
stock-12-Z-325 |
Gun Tub |
stock-12-Z-326 |
1/8" to 2.0" Pipe Fittings (Malleable Iron Galvanized), Crosses, Tees, Couplings and Elbows |
stock-12-Z-327 |
1/8" to 2.0" Pipe Fittings (Brass and Bronze) (For working pressures up to 125 lbs.) |
stock-12-Z-328 |
1/2" to 2.0" Pipe Fittings (Brass or Bronze) Plugs, Caps, Bushings, Reducing Couplings and Nipples (For working pressures up to 125 lbs.) |
stock-12-Z-329 |
1/8" to 2".0 Pipe Fittings, Reducing Couplings and Bushings, Plugs, Caps and Nipples (For Working Pressures up to 150 lbs.) Malleable Iron (Galvanized) |
stock-12-Z-330-sh1 |
Swivel Joints (Barco, Bordo and Flexo Types) |
stock-12-Z-330-sh2 |
Swivel Joints (Barco, Bordo and Flexo Types) |
stock-12-Z-331 |
Oil Cans, Details |
stock-12-Z-332 |
Trip Gong |
stock-12-Z-333 |
Drill Jig Bushings |
stock-12-Z-334 |
Oil or Grease Gun |
stock-12-Z-335 |
Locknuts and Lock Washers for Ball Bearings |
stock-12-Z-336 |
Radial Ball Bearings (Inch Type) |
stock-12-Z-337 |
Cable Terminals and Cable Tags |
stock-12-Z-338-sh1 |
Pipe Fittings (Bronze) Details |
stock-12-Z-338-sh2 |
Pipe Fittings (Bronze) Details |
stock-12-Z-339 |
Grip Type Hydraulic Grease Gun and Fittings |
stock-12-Z-340 |
Flared Tube Couplings, Standard Tube Weight Tube Sizes |
stock-12-Z-341 |
Flared Tube Couplings, Standard Tube Weight Tube Sizes |
stock-12-Z-345 |
Flared Tube Couplings, Standard Tube Weight Iron Pipe Sizes |
stock-12-Z-346 |
Flared Tube Couplings, Standard Tube Weight Iron Pipe Sizes |
stock-12-Z-350 |
Flared Tube Couplings, XX Heavy Weight Tube Size |
stock-12-Z-351 |
Flared Tube Couplings, XX Heavy Weight Tube Size |
stock-12-Z-355 |
Flared Tube Couplings, XX Heavy Weight Iron Size |
stock-12-Z-356 |
Flared Tube Couplings, XX Heavy Weight Iron Pipe Size |
stock-12-Z-363 |
Flared Tube Couplings, Standard Weight Tube Size (Triple Type) |
stock-12-Z-364 |
Flared Tube Couplings, Standard Weight Tube Size (Triple Type) |
stock-12-Z-365 |
Flared Tube Couplings, Standard Weight Tube Size (Triple Type) |
stock-12-Z-366 |
Flared Tube Couplings, XX Heavy Weight Tube Size (Triple Type) |
stock-12-Z-367 |
Flared Tube Couplings, XX Heavy Weight Tube Size (Triple Type) |
stock-12-Z-368 |
Flared Tube Couplings, XX Heavy Weight Tube Size (Triple Type) |
stock-12-Z-369 |
Ball Bearings Radial (Shielded Type) |
stock-12-Z-370 |
Flared Tube Couplings, XX Heavy Weight Iron Pipe Size (Triple Type) |
stock-12-Z-371 |
Flared Tube Couplings, XX Heavy Weight Iron Pipe Size (Triple Type) |
stock-12-Z-372 |
Flared Tube Couplings, XX Heavy Weight Iron Pipe Size (Triple Type) |
stock-12-Z-373 |
Swivel Joints (Chiksan Type) |
stock-12-Z-374 |
Variable Rheostats For Bore Searchers |
stock-12-Z-375 |
Wire Terminals |
stock-12-Z-376 |
Grease Hand Gun Loader and Details |
stock-12-Z-377 |
Grease High Pressure Pump and Details |
stock-12-Z-379 |
Fittings Grease Hydraulic Grip Type, 1/4-28 U.S.F. Thread Tapered 3/4" per foot |
stock-12-Z-382 |
Power Transformers (for electronic equipment) Plate and Filament Type |
stock-12-Z-383 |
Power Transformers Multiple Secondary (for electronic equipment) |
stock-12-Z-384 |
Power Inductors (for electronic equipment) |
stock-12-Z-385 |
Capacitors, Energy Storage (for Direct Current) |
stock-12-Z-386 |
Electron Tube Sockets and Electrical Connectors |
stock-12-Z-387 |
Miscellaneous Fittings (for electronic equipment) |
stock-12-Z-388 |
Resistors, Wire Wound (low power) |
stock-12-Z-700 |
Socket Wrenches, For 1/4" to 1.0" U.S. Std. Nuts |
stock-12-Z-701 |
Socket Wrenches for 5/16" to 1-1/2" U.S. Std. Nuts |
stock-12-Z-704 |
Chisels, Cold, Cape, Round Nose and Diamond Point |
stock-12-Z-705 |
Hand Screw Drivers |
stock-12-Z-707 |
Single End Wrenches for 1/4" to 3/4" U.S. Std. Nuts (Semi-Finished) |
stock-12-Z-708 |
Single End Wrenches for 3/16" and 7/8" to 1-1/8" U.S. Std Nuts and No. 4 Machine Screw Nuts |
stock-12-Z-709 |
Single End Wrenches for 1-1/4" to 1-1/2" U.S. Std. Nuts (Semi-Finished) |
stock-12-Z-710 |
Single End Wrenches for 1-5/8" to 2-1/2" U.S. Std. Nuts (Semi-Finished) |
stock-12-Z-711 |
Double End Wrenches for 1/4" to 1.0" U.S. Std Nuts |
stock-12-Z-712 |
Double End Wrenches for 5/8" to 1-3/8" U.S. Std Nuts |
stock-12-Z-713 |
Pin Spanner Wrenches for 2" to 6" Dia. Circle |
stock-12-Z-714 |
Face Spanner Wrenches for 1".0 to 4".0 Dia. Circles (Semi-Finished) |
stock-12-Z-715 |
Adjustable Spanner and Alligator Wrenches |
stock-12-Z-716 |
Cap Screw Wrenches, Heavy |
stock-12-Z-717 |
Set Screw Wrenches (Semi-Finished) |
stock-12-Z-718 |
Reversible Ratchet Wrench |
stock-12-Z-719 |
Ratchet Wrench and Sockets |
stock-12-Z-720 |
Socket Wrenches (offset and pin handles) |
stock-12-Z-721 |
Engineers Wrenches (15 degree Open Ends) Single and Double Heads, For American Standard Bolts and Nuts |
stock-12-Z-722 |
V Blocks and Clamps |
stock-12-Z-723 |
Wrenches (For Hexagonal Socket Set Screws and Socket Head Cap Screws) |
stock-12-Z-724 |
Socket Wrenches (Standard Series 1/2" drive) Handles and Parts |
stock-12-Z-725 |
Check-Nut Wrenches and Tappet Wrenches |
stock-12-Z-726 |
Handles for Plug Gages |
stock-12-Z-727 |
Metal Tool Box (for Socket Wrench Set) |
stock-12-Z-728 |
Pliers and Tweezers, Details |
stock-12-Z-729 |
Flexible Extension Flashlight |
stock-12-Z-730 |
Thread Ring Gage Adjusting Screws, Sleeves, and Locking Screws |
stock-12-Z-731 |
Socket Wrenches Handles and Parts |
stock-12-Z-732 |
Combination and Box Wrenches |
stock-12-Z-733 |
Punches |
stock-320-Z-1 |
Fire Brick |
stock-460-Z-1 |
Bronze Bearing and Bushing Stock |